Browse Our Catalog

Voltage Testers - Page 2 - On Sale Now! Save up to 10%


On Sale! Up to 10% off on Voltage Testers at Peri Matrix, Page 2. Top brands include Greenlee, Estink, Tektronix, Fluke, MSD Ignition, Hantek, SID LED, AEMC, S-Tech, Gold-Line, AT, ETCR, Megger, North Shore Safety, T-king, & top-tool. Hurry! Limited time offers. Offers valid only while supplies last.



Greenlee 93-172-C Digital Light Meter, With Certificate of Calibration
Greenlee 93-172-C Digital Light Meter, With Certificate of Calibration
By Greenlee
In Stock
$320.62

mpn: 93-172-C, ean: 0783310070849,

4.7 out of 5 stars with 20 reviews
Digital Light Meter, CertifiedMeasures incandescent, fluorescent, metal halide, high-pressure sodium, and halogen lamp output. Color and cosine-corrected for enhanced accuracy. Measures up to 50000 lux. Peak and data hold means no lost measurements. Includes certificate of calibration.


Waveform Generator,Generator Counter for 60MHz FeelTech FY6600 DDS Function Arbitrary Waveform Generator Kit Frequency Meter
Waveform Generator,Generator Counter for 60MHz FeelTech FY6600 DDS Function Arbitrary Waveform Generator Kit Frequency Meter
By Estink
In Stock
$142.99

ean: 0654936007192,

4.0 out of 5 stars with 34 reviews
Packaged included: 1 x FY6600 main unit 1 x Power cable(US Plug) 1 x USB wire 1 x BNC wire 1 x CD 1 x Q9 Clip wire Specifications: Model: FY6600 Frequency: 60Mhz Screen display: 2.4'' TFT Color: Grey Size: 194x178x69mm Product Advantages: - FY6600 uses a professional 14Bit high-speed D/A chip, rather than a few inexpensive resistors to build a 12 bit D/A resistor network. The higher the resolution, the smoother the detail waveform. Recommend: Observe the details for two schemes of sine wave


Tektronix P5200A 50X/500X 50 MHz High Voltage Differential Probe, ±1300 V Common Mode Voltage, 1.8m Cable Length
Tektronix P5200A 50X/500X 50 MHz High Voltage Differential Probe, ±1300 V Common Mode Voltage, 1.8m Cable Length
By Tektronix
SKU: #P5200A
In Stock
$1,100.00

sku: P5200A, mpn: P5200A, ean: 0013227293063,

4.6 out of 5 stars with 53 reviews
The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.50 MHz Bandwidth. No More Floating Your Scope Unsafely. Easy Connection to ICs and Bus Bars. Safe for User and DUT. Powered From 9 VDC Wall Adapter.


Fluke 700G/TRACK Data Logging Cable and Software, For The 700G Pressure Test Guages
Fluke 700G/TRACK Data Logging Cable and Software, For The 700G Pressure Test Guages
By Fluke
SKU: #FLUKE700G/TRACK
In Stock
$599.99
$539.99
You Save: 10%

sku: FLUKE700G/TRACK, mpn: 700G/TRACK, ean: 0785577593840,

4.3 out of 5 stars with 33 reviews
Software for the 700G Pressure Test Gauges. Manage your instruments and calibration data with this easy-to-use software. For use with 700G Series gauges to perform real time data logging. Enables data download and logging configurations to the 700G Series gauges for a remote logging event. Configure logging event reading rate, duration and measurement units. Upload measurements logged remotely and display or export measurements. Includes communication cable for connection to a PC and CD-Rom


SMD VM-1 Analog LED DC Volt Meter (12v) by MSD Ignition
SMD VM-1 Analog LED DC Volt Meter (12v) by MSD Ignition
By MSD Ignition
In Stock
$78.98

mpn: CECOMINOD033395, ean: 0700987892437,

4.9 out of 5 stars with 19 reviews
SMD 12v DC Analog LED Volt MeterInput Range: 6v-30v. Voltage Reading Range: 10.1v - 15.8v. Accuracy: +/- 0.15v (due to the nature of a bar graph). 100% Analog circuitry allows for near instantaneous voltage accuracy versus a traditional digital voltage meter. Response time from one end of range to the other is less than 200 milliseconds..


Hantek DSO5102P USB Digital Storage Oscilloscope 2 Channels 100MHz 1GSa/s
Hantek DSO5102P USB Digital Storage Oscilloscope 2 Channels 100MHz 1GSa/s
By Hantek
In Stock
$229.00

mpn: 20-010-718, ean: 6015687259164,

4.6 out of 5 stars with 15 reviews
The model DSO5102P is a new digital storage oscilloscope develped by Hantek. It has a large (7.0-inch) color display,WVGA(800x480), 2 Channels, 100MHz Bandwidth. It will be one of your best choices. USB host and device connectivity, standard Multiple automatic measurements Four math functions, including FFTs standard Provides software for PC real-time analysis100MHz bandwidths. 1GSa/s Real Time sample rate. Large (7.0-inch) color display,WVGA(800x480). Record length up to 40K. Trigger mode:


Fluke 80K-15 High Voltage Probe
Fluke 80K-15 High Voltage Probe
By Fluke
SKU: #FLUKE80K-15
In Stock
$299.99
$269.99
You Save: 10%

sku: FLUKE80K-15, mpn: 80K-15, ean: 0095969063517,

4.1 out of 5 stars with 54 reviews
FLUKE 80K-15 TEST, PROBESExtends-voltage measuring capability of an AC/DC-voltmeter to 15000-volts peak AC or DC Overvoltage Category I. Basic accuracy: DC plus or minus 2 percent, 60Hz: plus or minus 5 percent. Division ratio: 1000:1. Input resistance: 1000 Megohm. Required meter input resistance: 10 Megohm.


Fluke A3003FC Wireless 2000 Amp DC Clamp Meter
Fluke A3003FC Wireless 2000 Amp DC Clamp Meter
By Fluke
In Stock
$509.99
$458.99
You Save: 10%

mpn: FLUKE-A3003FC, ean: 0095969785273,

4.8 out of 5 stars with 30 reviews
A fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect enabled units.Measures up to 2000 A dc. Large jaw size (64 mm) for measuring large, high current conductors. Logging function for the recording and saving up to 65,000 measurements.


SID LED Lamp and TV Backlight Tester for All LED Lights Repair Output 0-320V
SID LED Lamp and TV Backlight Tester for All LED Lights Repair Output 0-320V
By SID LED
In Stock
$32.99

ean: 0613739727386,

4.3 out of 5 stars with 54 reviews
Model: GJ2C Input Voltage:AC 85-265V (International General) Output Voltage: DC 0-320V Output Current:30mA Voltage Range:0-320V (Adopt soft start mode, the voltage slowly increases.About 4% of the reasonable error!) Main Application: - Testing the LED TV backlight without disassemble.Applicable to any size LED TV backlight repairs. Testing of LED stirng, LED panel,COB and integrated LED lights,etc.(DO NOT LOOK DIRECTLY AT THE LIGHT.) Testing of single LED bead.(Don't connect the probes to the


AEMC 275HVD Non-Contact AC High Voltage Detector, 240V to 275kV Range
AEMC 275HVD Non-Contact AC High Voltage Detector, 240V to 275kV Range
By AEMC
SKU: #275HVD
In Stock
$329.00
$312.55
You Save: 5%

sku: 275HVD, mpn: 2131.12, ean: 0685338230017,

4.6 out of 5 stars with 32 reviews
The AEMC 275HVD Non-Contact High Voltage Detector detects radiated electrical fields from about 10'' (25 cm) away (and farther for lower voltage), is for use with hot sticks incorporating a universal spline adapter, and has an audible buzzer and bright red LED to indicate live voltage. The eight voltage sensitivity ranges, selected by rotary selector, are 240V, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, and 275kV. The self-test position ensures that circuitry, annunciators, and battery work before use.


AEMC CL601 Simple Logger II Single-Channel Clamp-On Current Data Logger, 600A
AEMC CL601 Simple Logger II Single-Channel Clamp-On Current Data Logger, 600A
By AEMC
SKU: #AEMC2126.01
In Stock
$489.00
$474.05
You Save: 3%

sku: AEMC2126.01, mpn: 2126.01, ean: 0685338140323,

4.3 out of 5 stars with 38 reviews
The Simple logger II is a battery powered, one channel recording device with an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of +/-2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples (Harmonics are only available from the Simple Logger II Control Panel within the DataView application). The Simple Logger II records TRMS at a rate of up


New 6th Generation Monitor Laptop TV LCD/LED Panel Tester 60 Programs w/ VGA DC LVDS Cables Inverter LED Board 12v 4a Adapter
New 6th Generation Monitor Laptop TV LCD/LED Panel Tester 60 Programs w/ VGA DC LVDS Cables Inverter LED Board 12v 4a Adapter
By S-Tech
In Stock
$72.00

mpn: The 6th Generation panel tester, ean: 0601308688770,

4.1 out of 5 stars with 20 reviews
Important: 1, Please carefully consider the order. You must know how to use it. we do not provide technical support . 2, Do not try to disassemble or open it . Update: 1.Built-in 60 programes, 15 tester pictures 2.Support to 7''- 84'' panel 3,Resolutions: supoort to 2048x1536 2.Short circuit protection.Cancelled the CR2032 button battery in the tester, so no need to change the battery any more Leave us your email to get English instructions now!! Features: 1.Easy and convenient to operate,


Gold Line ZM-1 Impedance Meter
Gold Line ZM-1 Impedance Meter
By Gold-Line
In Stock
$578.50

mpn: ZM-1, ean: 0697506028036,

4.5 out of 5 stars with 10 reviews
A portable, battery operated meter useful to every sound contractor or installer, this unique instrument will make measurements on 25, 50, 70, or 100 volt line systems. Sine waves are generated at 100 Hz, 330 Hz, 1 kHz, or 10 kHz to read impedance or calculated watts.Test Frequencies: 100Hz, 330Hz, 1kHz, 10kHz. Connectors: Load/Output - Banana Jacks.


Greenlee GT-12 Non-Contact Detector - 5 PACK -
Greenlee GT-12 Non-Contact Detector - 5 PACK -
By AT
In Stock
$49.99

ean: 0858105008014,

4.9 out of 5 stars with 20 reviews
GT-12 NON-CONTACT VOLTAGE DETECTOR PACKAGE OF FIVEBright LEDs flash and audible alarm sounds if voltage is present. Safe, non-contact voltage detection Use to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and cables or to find a break in a wire. Automatically turns off after five minutes of non-use to conserve battery life.


Tektronix TPP0200 10X 200 MHz Passive Voltage Probe, Covered BNC, 1.3m Length
Tektronix TPP0200 10X 200 MHz Passive Voltage Probe, Covered BNC, 1.3m Length
By Tektronix
SKU: #TPP0200
In Stock
$65.00

sku: TPP0200, mpn: TPP0200, ean: 0745332494430,

4.5 out of 5 stars with 11 reviews
The TMDP0200 is equipped with the TekVPI interface which allows smart communication between the oscilloscope and probe. Pushing the probe menu button will launch the probe control menu on the oscilloscope display providing access to all relevant probe settings and controls.Designed for medium-voltage applications. Differential voltage to ±750 Volts. Overrange Indicator. Switchable Attenuation. Safety Certified.


ETCR ETCR5000 Power Quality Analyzer Meter with 3 Phase Power Analyzer Multi-functional Operation with Optional Current Sensor Model
ETCR ETCR5000 Power Quality Analyzer Meter with 3 Phase Power Analyzer Multi-functional Operation with Optional Current Sensor Model
By ETCR
In Stock
$1,589.99

mpn: ETCR 16, ean: 8431269279777,

4.5 out of 5 stars with 25 reviews
Specification Description: Power Supply: Rechargeable lithium battery pack 9.6V, external charger Power consumption: Current consumption 490mA, battery work 8 hours continuously Current clamp type: ETCR 008B current clamp: 7.5mm * 13mm(4PCS), CT size: Ф8mm Channel number: 4U/4I Line voltage: 1.0V~2000V Phase voltage: 1.0V~1000V Frequency: 40Hz~70Hz Power parameter: W,VA,var,PF,DPF,cosφ,tanφ Electrical parameters: Wh,varh,Vah Harmonic: Yes, 0 to 50 times Total harmonic


Megger TTR20 Hand-Held Transformer Turns Ratio Tester
Megger TTR20 Hand-Held Transformer Turns Ratio Tester
By Megger
SKU: #MEGGERTTR20
In Stock
$3,215.00

sku: MEGGERTTR20, mpn: TTR20-1,

4.9 out of 5 stars with 48 reviews
The Megger TTR20 hand-held transformer turns ratio test meter measures the turns ratio, excitation current, and polarity of single- and three-phase power, potential, and tapped transformers. This digital meter has automatic range selection for flexibility and ease of use. The tester automatically self-calibrates prior to performing each test for increased safety and accuracy of results. The unit measures turns ratio from 0.8:1 to 10,000:1, excitation current from 0 to 100mA, and indicates


North Shore Safety PGFS-83105 30 Amp, 208 Volt, 3 Phase, Permanent Mount GFCI With Auto Reset
North Shore Safety PGFS-83105 30 Amp, 208 Volt, 3 Phase, Permanent Mount GFCI With Auto Reset
By North Shore Safety
In Stock
$262.25

mpn: PGFS-83105,

4.0 out of 5 stars with 51 reviews
Product Features Industrial design for rough service applications Largest 30 Amp switching contacts in the industry (high reliability) Dual indication lights displaying power and fault status Open neutral protection CSAus listed to UL 943 and CSA C22.2 No.144 Class A GFCI Enclosure is Chemical and U.V. resistant NEMA 4X and 6P wet location rated indoor/outdoor applications Double insulated user interface for added safety MADE IN THE USA Product Specifications Type: Class A Voltage: 208 VAC


4-20mA /0-10V/mV Current Voltage Signal Generator Signal Source Calibrator Signal Tester
4-20mA /0-10V/mV Current Voltage Signal Generator Signal Source Calibrator Signal Tester
By T-king
In Stock
$59.99

ean: 0600346998940,

4.4 out of 5 stars with 50 reviews
Description: LB78 functions cover most functions required for maintenance of PLC, DCS, ESD, field instrument, regulating valve and frequency changer, and it has long-term stability and high precision.it is characterized by safety protection with comprehensive in place and clear display. It adopts a brand shell and chooses grit finish, resistance soiling and anti-scratch. Its size is small and is easy to be carried Parameter: 1. Output signal:V: 0-11.00V,mA: 0-24.00mA,mV: 0-110.0mV 2. Working


LB02 Resistance Current Voltmeter Signal Generator Source Process Calibrator 4-20mA/0-10V/mV LCD Display Update from LB01
LB02 Resistance Current Voltmeter Signal Generator Source Process Calibrator 4-20mA/0-10V/mV LCD Display Update from LB01
By top-tool
In Stock
$94.99

ean: 0686603167687,

4.8 out of 5 stars with 27 reviews
LB02 Resistance Current Voltmeter Signal Generator Source Process Calibrator 4-20mA/0-10V/mV LCD Display Update from LB01 Description: This instrument can output/measurement the following signals: Current signal/Voltage signal/mV signal; 8 kinds of thermocouple(E,K,B,S,T,R,J,N) signal; Resistance signal; Thermal resistance(Pt100,Cu50)signal, containing 14 input,15 output, analog meter site can be read or the vast majority of quantities. V, mV, mA, Ω input and output has a corresponding button,



Viewing Page 2 of 3

View more products in Testers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - perimatrik.org. All Rights Reserved.