Mounts & Accessories - Page 2 - Extreame Savings! Save up to 50%


Extreame Savings! Up to 50% off on Mounts & Accessories at Peri Matrix, Page 2. Top brands include STEPPERONLINE, EDGE INDUSTRIAL EMZ, ACT MOTOR, SainSmart, Qubino, WTCZ, KB Electronics, TOAUTO, King Kutter, Migro, VEVOR, Clarke, XDYNA, Ion Motion Control, ABB, John Deere, UCONTRO, & Linear Actuator. Hurry! Limited time offers. Offers valid only while supplies last.



STEPPERONLINE 15:1 Planetary Gearbox Nema 23 Stepper Motor 2.8A for DIY CNC Mill Lathe Router
By STEPPERONLINE
In Stock
$180.00
$90.00
You Save: 50%

mpn: 23HS22-2804S-PG15, ean: 0701056574841,

4.3 out of 5 stars with 46 reviews
This high precision NEMA 23 Stepper motor has an integrated Planetary gearbox with a 15.3:1 gear ratio, the resolution reach 0.12° step angle. It's a good solution in applications that need very low rotation speeds and/or lots of torque. Electrical Specification * Manufacturer Part Number: 23HS22-2804S-PG15 * Motor Type: Bipolar Stepper * Step Angle: 0.12° * Holding Torque without Gearbox: 1.25Nm(177.01oz.in) * Rated Current/phase: 2.8A * Phase Resistance: 0.9ohms * Recommended Voltage: 24-


NEW 3.7HP COMPRESSOR DUTY ELECTRIC MOTOR, 56 FRAME, 3450 RPM, 5/8" SHAFT DIAMETER, NEMA RATED MOTOR, REPLACES 5HP SPL MOTORS RATED 15-17AMPS
By EDGE INDUSTRIAL EMZ
In Stock
$189.50

ean: 0713807486877,

4.2 out of 5 stars with 47 reviews
3.7 HP - 1 PHASE - 56 FRAME - 3450 RPM - 230VAC - 5/8'' SHAFT ELECTRIC MOTOR FOR BELT DRIVEN AIR COMPRESSORS CONTINUOUS RUB COMPRESSOR DUTY MOTOR. ODP (OPEN DRIP PROOF FOR DRY INDOOR ENVIRONMENTS) Full Manufacturers Warranty + FREE SHIPPING to lower 48 states Technical Note:: Please make sure you correctly match the FL amp rating on the motor you're replacing. This is a 3.7HP 56frame 17.2 FLA @ 230V. Please double check the motor you're replacing matches the amperage and frame size of this


ACT Motor 1PC Nema 34 Brushless DC Motor 1.05N.m L81mm+1PC Driver BLDC-8015A 50V for CNC DIY
By ACT MOTOR
In Stock
$260.00
$179.00
You Save: 31%

ean: 0710654116032,

4.8 out of 5 stars with 52 reviews
 Motor Specification: - Model No: 86BLF03 - Motor Type: 3 Phase Nema 34 Brushless DC Motor - Nominal Voltage: 48(V) - No Loan Speed:3700±10%(RPM) - Continuous Torque: 1.05(N.m.Min) - Rated Speed: 3000±10%(RPM) - Torque Constant: 0.11N.m/A - Motor Weight: 0.25(kg) Mechanical Dimensions: - Frame Size: 85.8mmX85.8 mm - Body Length: 81mm - Shaft Diameter: 11.6mm - Shaft Length: 25 mm   Driver Specification:- Model:BLDC-8015A - Power:24~50VDC, - Capacity:up to motors - Current


SainSmart Mach3 CNC USB 4 Axis Kit, TB6600 4 Axis Stepper Motor Driver, USB Controller Card 100KHz, 4pcs Nema23 270oz-in Motor
By SainSmart
In Stock
$299.99
$229.99
You Save: 23%

mpn: 0641055599967, ean: 0641055599967,

4.1 out of 5 stars with 52 reviews
Overview: TB6600-T4 4 axis driver board, using the Toshiba TB6600HG driver chip, the maximum output of 4.5A current, current stepless adjustable, 4 stepper motors can be driven at the same time, suitable for NEMA17, NEMA23 stepper motor, has a 12V power supply, can be used for MACH3 interface board or CNC controller; with large driver current, smooth running, quiet small volume, convenient installation, high cost performance. It is suitable for making CNC machines and other automation


Qubino Z-Wave Plus RGBW Controller ZMNHWD3 for 12-24V LED Strips and Light Bulbs
By Qubino
In Stock
$49.95

mpn: ZMNHWD3, ean: 3830062070706,

4.7 out of 5 stars with 10 reviews
NOTE: This device requires a power supply matching the power rating of the load it's connected to. Check if you have a 12 or 24 VDC LED strip before installing the Qubino device. Do NOT connect the Qubino RGBW dimmer to 110 VAC.SPECIFICATIONS:Model Number: ZMNHWD3Z-Wave Signal Frequency: 908.42 MHzPower: 12-24 VDCMaximum Load: 8 A for single channel, 13 A total output (max 3.25 A per each RGBW channel recommended)Power Consumption: 0.5 W at 12V / 0.72 W at 24VZ-Wave Range: Up to 130 feet line


WTCZ 3PCS Nema 23 Stepper Motor Bipolar 112mm Body & 300N.cm Torque & 4 Lead &3.0 A with 1.8 Step angle
By WTCZ
In Stock
$195.00
$129.99
You Save: 33%

ean: 0781573618792,

4.7 out of 5 stars with 52 reviews
Nema 23 Stepper Motor:  Frame Size: Nema 23  Phase: 2 Phase  Step Angle: 1.8 Degree  Current: 3.0 A  Rated Voltage: 4.8 V  Resistance: 1.6 Ohm/Phase  Inductance: 6.8 mH/Phase  Holding Torque: 425oz-in (3N.m)  Detent Torque: 12N.cm  Rotor Inertia: 800g.cm2  Number of Wire Leads: 4 (Black A+, Green A-, Red B+, Blue B-)  Weight: 1.8kg  Length: 112 mm  Application:  Our Stepper Motors are used on small to mid-sized CNC mills or milling machines, CNC lathes, Pick-n-place


KB Electronics KBWM-120 DC motor control 9380 NEMA-1 enclosure upc: 024822093804
By KB Electronics
In Stock
$98.70

mpn: 9380, ean: 0024822093804,

4.2 out of 5 stars with 39 reviews
This Drive will not operate without a HORSEPOWER RESISTOR and ARMATURE FUSE. Horsepower resistors and armature fuses are available for purchase from our Amazon store. KBWM Series NEMA-1 DC Drives The KBWM control is a compact version of our Multi DriveTM (KBMD). The control is packaged in an all metal NEMA-1 enclosure. This unidirectional SCR drive utilizes the KBMM speed control module, which prevents motor failure due to demagnetization, and contains AC line and armature fusing and a barrier


NMRV-030 Worm Gear Speed Reducer Ratio 80:1 NEMA23 Stepper Gearbox for Stepper/Servo Motor
By TOAUTO
In Stock
$65.00

mpn: NMRV030, ean: 0737080768147,

4.5 out of 5 stars with 33 reviews
Type: Worm-Gear Reducer Speed Ratio Range: 10/15/20/25/30/40/50/60/80, please choose the correct ratio you need. Input Bore Size : 11mm Input Flange Model: NEMA23 Output Bore Size: 14mm Application: Matched with Servo/Stepper Motor Goods Color: ArgentateCountry of Origin: China(One year warranty) if you need the Shaft Sleeve: https://www.amazon.com/dp/B07G9YN4CLNEMA 23 Stepper Motor Worm Gear Reducer ;. Input Bore Size:11mm, 0.43'' ;. Output Bore Size:14mm, 0.55'' ;. Speed Ratio 80:1. Fast


Heavy Duty King Kutter Stump Jumper, Fits 4', 5' and 6' Rotary Mowers 403031
By King Kutter
In Stock
$131.50

mpn: 403031,

4.5 out of 5 stars with 60 reviews
This is a Heavy Duty version of the King Kutter Stump Jumper code 403031, Fits 4', 5' and 6' Rotary Mowers, we have added extra vertical reinforcements on either side of the blade bar to add additional strength to resist bending. We have also increased the pan thickness to 0.20'' for extra strength. This unit is much stronger than the factory original unit! Direct replacement no modifications needed!13-1/2'' Blade bolt Mounting hole centers. 12 Spline x 1.57'' blade hub. Vertical reinforcements


12 Pole Contactor Normally Open Lighting Contactor 120V Coil, 4 x 3 Set 30A, 40A, 50A, 60A
By Migro
In Stock
$199.99

mpn: 934484,

4.3 out of 5 stars with 47 reviews
40 Amp 4x 3 Pole 400 VAC Contactors - NO OPEN Contacts Energy saving low power drain, electrically held lighting contactor. FEATURES DIN rail mounting 60A. Incandescent or resistive load, 32 A. Ballast and General purpose Power ON indicator Coil: 62VA inrush, 12VA sealed. IEC AC Rate: AC-1; 16 kW, AC-3; 11 kW @400V Operating Temperature -30...+70 °C (-22...+158 °F) Solid Conductor: 25 mm2 Max torque 0.6 Nm Stranding Conductor: 16 mm2, Max torque 0.6 Nm, - Electric strength: 4 kV Max switching


VEVOR VFD 4KW 220V 5HP 7A Variable Frequency Drive Inverter AVR Technique VFD Drive for Spindle Motor Speed Control (4KW)
By VEVOR
In Stock
$158.97

mpn: HuanYang, ean: 0712166589762,

4.3 out of 5 stars with 35 reviews
Introduction This VFD can be used as a motor speed control and a phase converter. The input for this VFD is 1 phase . You can control the different speed as you like when yo use this VFD. Advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability. This item use Sine wave PWN(SPWM ) for the control system and performance excellently. Many customer bought this VFD from us to use for: Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Features: Easy PLC function can


Clarke Vac Motor, 120V Ac, 2 Stage ZD49000A
By Clarke
In Stock
$98.73

mpn: ZD49000A,

4.8 out of 5 stars with 55 reviews
Item ZD49000A, replacement Vac Motor, 120V Ac, 2 Stage for Clarke cleaning equipmentVac Motor, 120V Ac, 2 Stage.


NEW 5HP COMPRESSOR DUTY ELECTRIC MOTOR, 56HZ FRAME, 3450 RPM, 7/8" SHAFT DIAMETER, NEMA RATED MOTOR
By EDGE INDUSTRIAL EMZ
In Stock
$227.99

ean: 0713807486891,

4.8 out of 5 stars with 10 reviews
5 HP - 1PH 56HZ - 3450RPM - 22 FULL LOAD AMPS AT 230V WILL REPLACE FRAME SIZES 143T / 145T / 56 / 56H / 56HZ ( THIS MOTOR WILL REPLACE MULTIPLE BOLT PATTERN CONFIGURATIONS) 3450 RPM - 22 AMP - 7/8'' SHAFT Diameter ELECTRIC MOTOR FOR BELT DRIVEN AIR COMPRESSORS Capacitor Start & Capacitor Run Compressor duty motor Full Manufacturers Warranty + FREE SHIPPING to lower 48 states Same Day shipping if ordered 3PM EST Mon-Fri If you need help choosing the right motor to replace your old one. Please


Automatic DC12V Double to DC24V,Rated 120A- 1500W Winch Booster,Accelerate Speed by 2 Batteries, Supply 24/12V/500A Automatic Converter Used to SUV Jeep Track Competition Extreme Offroad
By XDYNA
In Stock
$110.23

mpn: Booster, ean: 0608651400226,

4.8 out of 5 stars with 34 reviews
Winch Accelerator by two batteries to quickly improve the speed efficiency,Applicable to extreme off-road competition Features and Installation Instructions: ★★ 1, three working modes: 1) Automatic mode by signal: Switch OFF (led is off): winch OUT 12v (led stays off) and winch IN at 24V (led comes on) by signal 2)Manual mode: Switch ON (led is light): OUT put constant 24 volts (led stays on) 3)12V mode: Switch OFF (led is off) No signal to terminal 1 (led is off all times): OUT put


RoboClaw 2x15A Motor Controller, 2 Channel, 15Amps Per Channel, 6-34VDC
By Ion Motion Control
In Stock
$89.95

mpn: R0412, ean: 0015568149528,

4.6 out of 5 stars with 32 reviews
The RoboClaw 2x15A is an intelligent motor controller designed to control two brushed DC motors at 15 Amps continuous with up to 30 Amps peak per channel. It can be controlled from USB, RC radio, PWM, TTL serial, analog and microcontrollers such as an Arduino or Raspberry Pi. RoboClaw automatically supports 3.3V or 5V logic levels, travel limit switches, home switches, emergency stop switches, power supplies, braking systems and contactors. A built-in switching mode BEC supplies 5VDC at up to 3


ABB, DP60C3P-1, 3 Pole, 60 Amps, 120VAC Coil, Definite Purpose Contactor
By ABB
In Stock
$94.33

mpn: DP60C3P-1,

4.9 out of 5 stars with 7 reviews
Type DP contactors provide high performance with flexibility and reliability, designed to match numerous applications including:MotorsPower suppliesFood service equipmentCompressorsBusiness machinesResistive heatingAir conditioningRefrigeration equipmentWeldingBrand New Genuine ABB Controls Parts. Factory Authorized ABB Controls Distributor. Tech Support on all products purchased from us..


15 each John Deere Tiller Tines PT8446 & PT8447 Full Set Model 550
By John Deere
In Stock
$256.50

mpn: PT8444 PT8445 PT8446 PT8447-15,

4.1 out of 5 stars with 13 reviews
15 each John Deere Tiller Tines PT8446 & PT8447 Full Set Model 550.


UCONTRO Mach3 USB 3 Axis CNC Motion Control Card Breakout Board 2000 KHz 2 MHz, Support Resume from Breakpoint and Spindle Speed Feedback, Work with Windows 7, 10 (3 Axis)
By UCONTRO
In Stock
$169.90

mpn: MK3,

4.8 out of 5 stars with 30 reviews
Package Contents: 1 x CNC Mach3 USB 3 Axis Motion Control Card 1 x USB Cable 1 x English Manual 1 x CD Overview: This is the latest generation 3 axis motion control card. It comes with resume from breakpoint function and spindle speed feedback. Now new version is stronger, more stable and better performance. Features: Dual-Processors, ARM+FPGA, More processing power Support all versions of Mach3.  Could resume from Breakpoint Support spindle speed feedback. USB jack does not need to install


BEMONOC Stroke 500mm 20 inch DC 24V 6000N 1322 Lbs Electric Linear Actuator Speed 6mm/s
By Linear Actuator
In Stock
$178.88
$148.88
You Save: 17%

mpn: LW-500MM24V6000N, ean: 0714559255902,

4.8 out of 5 stars with 46 reviews
It is very convenient to install, Home, electrical and mechanical, chemical, sanitary ware, leisure and other fields are widely used. For example:It can be applied to electric motor bed, operating bed, traction bed, massage chair, dental chair, electric wheelchair, electric sofa, electric booth, electric sunroof and ergonomic furniture.✔Rated Voltage: 24V DC; Stroke size: 500mm(20 inches);. ✔Load Capacity: 4000N(400KG/881Lbs); No-Load Speed: 6mm(0.236 inch)/sec;. ✔Fully Retracted Length


UCONTRO 24-60V DC CNC Brushless Driver Kit 400W ER8 Brushless Motor with Hall & 600W Driver with Control Panel & Motor Mount
By UCONTRO
In Stock
$139.00

mpn: UCSM759,

4.6 out of 5 stars with 58 reviews
I. Package included: 1 x 600W Brushless Driver with Control Panel 1 x 400W Brushless Motor with Hall 1 x ER8 Collet 1 x Motor Mount 1 x Manual (we will send it to you by email)      II. Description: This brushless driver is with hall. It can be used to engrave metal or non-metal and other materials.     III. Specification Feature: Driver: 1) High performance, low prices 2) DSP main control module 3) No current passing when no movement 4) Voltage range 24VDC-60VDC 5) Demountable panel 6)



Viewing Page 2 of 6

View more products in Electric Motors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - perimatrik.org. All Rights Reserved.