Browse Our Catalog

Foot Switches - Page 2 - Extreame Savings! Save up to 45%


Extreame Savings! Up to 45% off on Foot Switches at Peri Matrix, Page 2. Top brands include Linemaster, Temco, AceCrew, SSC Controls, Kirby, Aodesy, SIEMENS, Thincol, & Herga. Hurry! Limited time offers. Offers valid only while supplies last.



Linemaster T-91-SC3 Treadlite II Foot Switch, Electrical, Single Pedal, Momentary, SPDT Wired N.O, No Guard, Black, 6 ft. Cord with 3 Prong Plug (3-(Pack))
By Linemaster
In Stock
$169.90

ean: 6199991697215,

4.0 out of 5 stars with 11 reviews
This Linemaster T-91-SC3 Treadlite II foot 10 amp 125Vswitch has a steel housing, light actuation force, and a 6' power cord. This foot switch is suitable for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides momentary operation for quick-release termination. It has a steel-formed body with an electro-coated paint finish for durability and protection from corrosion. The non-skid foot pad and base give the foot switch stability to help


TEMCo Heavy Duty Foot Switch 10 QTY - Cast Aluminum Foot Switch 15A SPDT Electric Pedal Momentary 5 YEAR WARRANTY
By Temco
In Stock
$138.99

mpn: CN0085,

4.6 out of 5 stars with 43 reviews
This extra heavythickness cast aluminum foot switch includes a rotary locking cord strain relief. Non-slip base pads prevent foot switch from sliding on smooth surfaces. Cast chassis includes reinforcing ribsto further strengthen structure. Internals employ heavy duty gasketto prevent water, oil, or dust intrusion. Internal contact set employs single pole doublethrow (SPDT) switch assembly rated at 15A, 250VAC.SPDT (Single pole, double throw). Rated amps: 15A, Rated voltage: 250VAC. Cast


Linemaster 511-B Hercules Anti-Trip Foot Switch, Electrical, Single Pedal, Momentary, SPDT, Single Stage, Full Aluminum Guard, Orange
By Linemaster
In Stock
$170.45

mpn: 511-B,

4.5 out of 5 stars with 42 reviews
This Linemaster 511-B Hercules Anti-Trip 20 amp 125-250V, 1 HP foot switch has a heavy pilot duty of 250V maximum. It has a cast iron housing, cast aluminum guard, and a non-trip mechanism for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides single-stage, momentary operation for quick-release termination. It has a cast iron treadle and housing for strength and durability and a cast aluminum guard for protection. The anti-trip treadle mecha


TEMCo Extra Heavy Duty Foot Switch 10 QTY - W Guard 15A SPDT Electric Pedal Momentary New 5 YEAR WARRANTY
By Temco
In Stock
$279.00

mpn: CN0090,

4.5 out of 5 stars with 19 reviews
SPDT (Single pole, doublethrow), 15A, 250VAC / Material: Cast Aluminum / Dimensions: 8.07 x 5.83 x 5.00 in (205 x 148 x 127 mm) / Warranty: 5 Years / Internals employ heavy duty gasketto prevent water, oil, or dust intrusion. Internal contact set employs single pole doublethrow (SPDT) switch assembly rated at 15A, 250VAC.the cover guard has been redesignedto include an extra reinforcing rib aroundthe opening andthicker wallsto prevent inadvertent damage.Entire structure is constructed of extra


TEMCo Extra Heavy Duty Foot Switch 4 QTY - W Guard 15A SPDT Electric Pedal Momentary New 5 YEAR WARRANTY
By Temco
In Stock
$122.50

mpn: CN0088,

4.5 out of 5 stars with 10 reviews
SPDT (Single pole, doublethrow), 15A, 250VAC / Material: Cast Aluminum / Dimensions: 8.07 x 5.83 x 5.00 in (205 x 148 x 127 mm) / Warranty: 5 Years / Internals employ heavy duty gasketto prevent water, oil, or dust intrusion. Internal contact set employs single pole doublethrow (SPDT) switch assembly rated at 15A, 250VAC.the cover guard has been redesignedto include an extra reinforcing rib aroundthe opening andthicker wallsto prevent inadvertent damage.Entire structure is constructed of extra


Double Action Foot Switch Heavy Duty Industrial Pedal All ALUIMINUM CAST
By AceCrew
In Stock
$39.99

mpn: Foot Switch D3, ean: 0714983432955,

4.6 out of 5 stars with 35 reviews
Industrial Aluminum Cast Heavy Duty Dual Foot Switch ''THIS IS THE REAL DEAL !!'' A Code Compliant HANDS FREE OPERATION !! -UL Recognized Switch -Passed stringent tests for safety and code compliance in US and Canada -Better quality and durability than generic switches -Find more quantities and prices by clicking (SEE OTHER ITEMS) -Double Pole Single Throw (DPST) 1NO 1NC -Contact Rating: 0 to 250V, 0 to 15A, -Switch Action: Momentary (Springs Back) -Can be Converted to Foot-Activated Power Co


SSC Controls B850-1501 Foot Switch with Mounting Plate, Momentary, Single Pedal, 8-ft Cable with Piggyback Plug (3-Pronged)
By SSC Controls
In Stock
$27.75

mpn: B850-1501,

4.3 out of 5 stars with 49 reviews
The B850-1501 foot switch offers a small footprint in a long-lasting switch that's perfect for any application requiring a smaller size. The unit features a compact steel housing designed to minimize the footprint, yet still withstand the ruggedness of tough applications, and a mounting bracket to attach the unit firmly to the floor or equipment if needed. Features a 15-amp, 125 VAC-rated switch with an 8-foot cable and a 3-pronged piggyback plug (NEMA 5-15 series): plug the pedal into your


Linemaster 971-DC3O All-Purpose Foot Switch, Polymeric, Maintained Operation, Orange, 2 Prong Output, 2 Prong Output, 4A, 125VAC, 6 Foot Cord
By Linemaster
In Stock
$19.05

mpn: 971-DC3O, ean: 5448095777431,

4.7 out of 5 stars with 53 reviews
This all-purpose Linemaster foot switch has a reinforced polymeric pedal, a 6' power cord, and a single two-prong outlet for connecting with lights and other electric devices. The 4 amp 125V foot switch allows users to step on the switch's pedal for hands-free on-and-off power. It has maintained operation for press-and-release power activation and termination. The foot switch has a reinforced polymeric body that resists corrosion and rust, and comes with a non-glare finish. Raised ribs on the


Kirby Sentria II On Off Foot Pedal 110312
By Kirby
In Stock
$13.10
$7.16
You Save: 45%

ean: 0704550039090,

4.1 out of 5 stars with 38 reviews
Kirby Sentria II On Off Foot Pedal. Cover for on off foot pedal switch. Manufacturer Part No.: 110312 K-110312Kirby Sentria II On Off Foot Pedal.. Cover for on off foot pedal switch.. Manufacturer Part No.: 110312.


Aodesy Momentary NO NC Industrial Pedal Foot Switch Nonslip Metal Industrial Power Foot Pedal Switch AC 250V 15A
By Aodesy
In Stock
$24.99

mpn: 505, ean: 0745103311942,

4.5 out of 5 stars with 27 reviews
Specifications: Model No. : TFS-302;Action Type : Momentary Contact Type : 1NO 1NC;Material : Metal Rating Power : AC 250V 15A Size : 19.5 x 9.7 x 12.5cm / 7.7'' x 3.8'' x 4.9''(L*W *Max.H); Fit Cable Dia. : 0.8cm/ 0.31'';Screw Dia. : 1.9cm/ 0.75'' Mounting Hole Diameter : 0.55cm/ 0.22'' Package Content : 1 x Foot Pedal SwitchIt free up your hands to perform other procedure while make the operation in control with your foot.. This foot pedal switch is momentary type which controls the power on


SSC Controls F300-1502 Foot Switch, Maintained Action (Push On / Push Off), Single Pedal, 8-ft Cable with Leads, Die-Cast, Electrical
By SSC Controls
In Stock
$57.25

mpn: F300-1502,

4.6 out of 5 stars with 22 reviews
The F300-1502 is a ''Maintained Action'' foot switch, which means you push the pedal once to turn it on, and push it again to turn it off (you can remove your foot from the foot switch after you first push it, and it will stay on until you press it again). This foot switch has leads on the end of the cable, so you will have to wire this to your equipment (consult an electrical or knowledgeable person for proper wiring advice if needed, or see model F300-1501 for the 3-pronged piggyback plug


Siemens HA161234 Auxiliary Contact Kit 125/250 Volt AC 10 Amp 1 NO-1 NC for Use Heavy Duty Safety Switches Speedfax, Black
By SIEMENS
In Stock
$163.40
$109.55
You Save: 33%

mpn: HA161234, ean: 0783643173712,

4.5 out of 5 stars with 33 reviews
SIEMENS LOW VOLTAGE VBII HEAVY DUTY SAFETY SWITCH ACCESSORY. AUXILLARY SWITCH 1NO / 1NC RATED 600V SUITABLE FOR OPERATING CURRENTS 30/60/100/200A.SIEMENS LOW VOLTAGE VBII HEAVY DUTY SAFETY SWITCH ACCESSORY.


TEMCo Double Extra Heavy Duty Foot Switch W Guard - 4 QTY Electric NONC Duel Pedaltwin 5 YEAR WARRANTY
By Temco
In Stock
$250.00

mpn: CN0093,

4.9 out of 5 stars with 23 reviews
1 NO + 1 NC Contact Set per Pedal, 15A, 250VAC / Material: Cast Aluminum / Dimensions: 8.46 x 6.89 x 6.06 in (215 x 175 x 154 mm) / Internals employ heavy duty gasketto prevent water, oil, or dust intrusion. Internal contact set employs 1 NO + 1 NC contact set per pedal rated at 15A, 250VAC.the cover guard has been redesignedto include an extra reinforcing rib aroundthe opening andthicker wallsto prevent inadvertent damage.Entire structure is constructed of extra heavythickness cast aluminum.


Foot Switch for Power Tools,Magnetic Induction Foot Pedal Switch,2M Cable,Oil Resistant and Corrosion-Resistant,for SANREX TIG Welder
By Thincol
In Stock
$209.99

mpn: Thincolexhwdgyb8v, ean: 0754959938135,

4.8 out of 5 stars with 44 reviews
Features: The Hall magnetic induction technology adopted by the foot controller abandons the traditional mechanical adjustment mode, featured with long lifespan, maintenance-free and excellent control performance, which can save lots of maintenance cost and labor cost. This foot pedal is used in the TIG welder to control its starting current and output current. When pressing the pedal, the welder outputs small current at the beginning. As the stroke increases, the output current increases. The


Linemaster T-91-SC3A Treadlite II Foot Switch, Electrical, Single Pedal, Momentary, SPDT Wired N.O, No Guard, Black, 8 ft. Cord with 3 Prong Plug (5-(Pack))
By Linemaster
In Stock
$249.90

ean: 6199991693712,

4.6 out of 5 stars with 24 reviews
This Linemaster T-91-SC3A Treadlite II 15 amp 125V, 1/2 HP foot switch has steel-formed housing, non-skid pads, and cord with plug and is suitable for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides momentary operation for quick-release termination. It has a steel-formed housing with an electro-coated finish for durability and protection from corrosion. The non-skid foot pad and base give the foot switch stability to help prevent sliding


TEMCo Double Extra Heavy Duty Foot Switch W Guard - 5 QTY Electric NONC Duel Pedaltwin 5 YEAR WARRANTY
By Temco
In Stock
$315.00

mpn: CN0094,

4.8 out of 5 stars with 54 reviews
1 NO + 1 NC Contact Set per Pedal, 15A, 250VAC / Material: Cast Aluminum / Dimensions: 8.46 x 6.89 x 6.06 in (215 x 175 x 154 mm) / Internals employ heavy duty gasketto prevent water, oil, or dust intrusion. Internal contact set employs 1 NO + 1 NC contact set per pedal rated at 15A, 250VAC.the cover guard has been redesignedto include an extra reinforcing rib aroundthe opening andthicker wallsto prevent inadvertent damage.Entire structure is constructed of extra heavythickness cast aluminum.


Linemaster 592-EX Explosion Proof Foot Switch, Electrical, Single Pedal, Momentary, Full Aluminum Guard, Orange
By Linemaster
In Stock
$396.95
$385.17
You Save: 3%

mpn: 592-EX, ean: 0783667000001,

4.8 out of 5 stars with 9 reviews
This Linemaster 592-EX explosion-proof 15 amp 125V 3/4 HP / 10 amp 250V 1 HP, foot switch is approved for Class I, Zone I, Group IIA environments. It has a heavy-duty aluminum guard, base plate, and a handle for moving. This foot switch is suitable for use in industrial environments where flammable materials are present and users need hands-free on-and-off power activation. The switch has momentary operation for quick-release termination of power. The housing is non-spark, heavy-duty aluminum


HERGA SK-6252-BAAA-AAZ0 HD FS
By Herga
In Stock
$285.63

mpn: SK-6252-BAAA-AAZ0, ean: 5055639197732,

4.6 out of 5 stars with 26 reviews
Herga part Number: 6252-BAAA-AAZ0 Description: Heavy duty die-cast aluminum industrial footswitch Guard Colour: Yellow Base Colour: Black Cable entry: M20 Back entry Contact Configuration: DPST single operation, Slow break & make Contact gap: 3 mm suitable for mains isolation Mechanical endurance: 1 x 106 operations Max electrical rating: AC-15 6A 250V ; DC-13 6A 24V Temperature range: -25 C to +60 C Enclosure rating: IP67.


Foot Switch for Power Tools,Magnetic Induction Foot Pedal Switch,2M Cable,Oil Resistant and Corrosion-Resistant,for for OTC Welder
By Thincol
In Stock
$209.99

mpn: Thincolwdmc1ozhya, ean: 0754959938104,

4.2 out of 5 stars with 38 reviews
Features: 1. 100% brand new and high quality 2. Long service and it has excellent control performance 3. Fully enclosed control module with the advantages of dirt resistance and corrosion resistance, ensuring stable operation of the product 4. It has high sensitivity and control performance will not be affected by temperature 5. The foot controller can use with the argon arc welder to control the start and output current of the welder. Specification: Condition: 100% Brand N


Foot Switch for Power Tools,Magnetic Induction Foot Pedal Switch,2M Cable,Oil Resistant and Corrosion-Resistant,for SANREX TIG Welder
By Thincol
In Stock
$209.99

mpn: Thincolf52op6bcye, ean: 0754959938036,

4.9 out of 5 stars with 51 reviews
Features: 1. 100% brand new and high quality 2. Long service and it has excellent control performance 3. Fully enclosed control module with the advantages of dirt resistance and corrosion resistance, ensuring stable operation of the product 4. It has high sensitivity and control performance will not be affected by temperature 5. The foot controller can use with the argon arc welder to control the start and output current of the welder.   Specification: Condition: 100% Brand



Viewing Page 2 of 5

View more products in Switches & Dimmers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - perimatrik.org. All Rights Reserved.